Randoph & Briggs Update #2
Steps to complete this update are the following:
Step 1: Adding the Sills
Locate the small plastic bag that contains the little beige Sills (first 3 photos in the slide show)
Use the laser etched lines on your walls as a guide and apply a thin layer of glue. Apply 4 to the windows on your main building.
Step 2: Adding the base.
From the photos (4 & 5) Apply a thin layer of glue to your walls and place on your base. I like to do this step now so that I can easily hold the base as I complete the next step.
Step 3: Mixing up the putty.
i) I place the putty on a plastic bag and mix with a little water so that it is like a paste.
ii) Add some grey paint to the paste and mix around with a thin paint brush. (you may have to add a bit more water if it gets too dry and gooey)
iii) Using your paint brush lightly apply a coating to your 4 window sills and along your foundation (there is a laser etched lines to show the base from the bricks) and on your 4 corners of your building.
After the paste dries you may have to touch up with paint to get a darker grey colour if you wish.
The last 2 photos show the side building leaned up against the brick building to look at the colour I choose. I decided to do the left side of the building a union army blue and the right side of the building with some red trim and light tan/grey to represent the southern army. (It should all come together nicely … I hope)
